This Smart  Keyless USB Rechargeable Padlock (Door Lock) has a wide application! Perfectly used for doors, cabinets, bikes, backpacks, storage lockers, etc. 

It very Easy Operation because of no need for any tools, you can add or delete fingerprints easily by following the instructions of the user manual. 

Best part it has 10 Groups of Fingerprints, this Smart  Keyless USB Rechargeable Padlock (Door Lock) supports up to 10 fingerprints recording (support two administrators).

☑️ Features/Description

Multi-function: There are three functions of stripping, tangential and crimping.

Long service life: The tool head is made of all metal and has a long service life.

Feel comfortable: the handle is made of special material, non-slip, comfortable to use, strong touch, ergonomic design.

Save time and effort: Improve the effect of crimping efficiency, and individuals can easily complete the pressure line.

The high-quality of the blade: it can ensure that the cut port is flat and has no burr. The distance between the two metal blades is moderate, and the rubber of the twisted pair can be easily stripped, but it is not easy to cut the network cable.

The connection is firm: the outer diameter of the pressure line segment is consistent with the crystal head, and it is not easy to be misaligned so that the connection between the twisted pair and the crystal head can be.

10 Fingerprint Storage
Record 10times and save 10 groups, which can be used by the whole family.

High-Tech Chip
Using high-tech chips, fingerprint processing is faster, unlocking is more convenient, and your home is safer.

☑️ Detailed Instructions

(1) Add fingerprint for the first time (Manager):

Press the SET button for about 5 seconds, first, the blue light is short, then the green light flashes and then releases. Will want to set Fingers are placed at the center of the fingerprint to touch. If the data is successfully collected, a blue light will flash to indicate that data can be recorded. If it is not recorded or failed, it will flash a red light to remind the collection to be invalid. After the successful acquisition, after 10 completions, the green light is on, indicating that the fingerprint is added. The green light is flashing during the entire process of entering the fingerprint (indicating that it is the fingerprint entry status), but the lights of multiple colors are not illuminated at the same time. The finger that touches the pressure requires multiple angles to collect, which is beneficial to the expansion of the database and is helpful for the sensitivity of the judgment.

(2) Add member fingerprint:

Add fingerprint when there is already fingerprint: press the set up button for about 5 seconds, the blue light is shorted once and then released, the blue light is long, then enter the administrator (two administrators) Any one of the fingerprints (that is, the first or second fingerprint set), when the input administrator's fingerprint is correct, the indicator light changes from blue to green and blinks. Repeat the first step to complete the fingerprint.

(3) Delete all fingerprints:

In any mode, press the setup button for about 10 seconds, the blue light is on for 2 times and then released, the red light is on, and the administrator touches the fingerprint (any one of the two administrators). Next, if the fingerprint recognition is normal, the green light is illuminated and all fingerprints are deleted.

(4) Lock:

Immediately after pressing the lock beam for about 1 second in the unlocked state, it is locked immediately.

(5) Unlock:

In the locked state, input the fingerprint. If the fingerprint is correct, the lock beam will automatically pop up and unlock. If the fingerprint is correct, the green light is short; If the fingerprint is incorrect, the red light is short.

(6)  Low voltage: 

When the voltage is equal to or lower than 3.5V, the red indicator will flash for 15 seconds; if it is always in low power, every minute, report Police once.

(7)  Charging:

The red and green lights flash alternately during the charging process.

​Tips for fingerprint recording:

1. Try to touch the sensor by a different angle when lock records your fingerprint to ensure that it can recognize well during working.

2. Follow the steps strictly to record your fingerprint to make sure the process can be done easily.

☑️ Specification

1. Material: zinc alloy
2. Working Voltage: 3.0-4.2V
3. Lock weight and Size: 90g, 7.6 x 4.6 x 1.3(cm)
4. Fingerprint Sensor Coverage: 72x64MM
5. Unlock Speed: within 1 second
6. Working Period: a year per power Charge
7. LED Light: Three-color light: red / blue / green
8. Battery: 3.7V lithium build-in battery
9. Working Temperature: -10~+40 degrees Celsius
10.Fingerprint Capacity: record 10 times and save 10 groups

☑️ Package Included

1x Smart  Keyless USB Rechargeable Padlock (Door Lock)
1x USB Charging Cable
1x User Manual

☑️ Shipping Info
  • FREE Shipping (Watch this Video: OVERVIEW)
  • Always input your correct & complete shipping address
  • Expect the delivery time would be 2 to 4 weeks for the United States, Canada, United Kingdom, Australia, New Zealand, and all European Union Countries
  • Expect the delivery time would be 2 to 7 weeks for the rest of the Countries not mentioned above.
  • Stay updated,  you may TRACK YOUR ORDER after 3-5 days
  • For more information, please read our SHIPPING POLICY 
  • For further inquiries, CONTACT US

Source: YouTech.Me